Sentence examples for corresponding drill from inspiring English sources

Using the corresponding drill sleeves, the first, second, sixth and seventh holes were pre-drilled with a 4.0 mm drill bit.

In addition to routine surgical instruments, Weitlaner and Gelpi-retractors, a periosteal elevator, pneumatic drill (Synthes, Waldenburg, Switzerland) with an 8 mm, slightly modified drill bit (KaVo INTrASurg 500®, KaVo Dental AG Biberach, Germany, modified by Synthes, Waldenburg, Switzerland) and a corresponding drill guide were used (Fig. 1).

The corresponding drilling was performed with abundance of irrigation, and the drilling speed and the initial torque used for the insertion of the dental implants were recorded.

Optimum bit types and designs with corresponding drilling parameters can be recommended utilizing a simulator with rate of penetration (ROP) models.

The tragedy of the Gulf oil spill has, predictably, raised cries from environmentalists to end offshore drilling once and for all, with corresponding escalation of "drill, baby, drill" from those who would oppose motherhood if environmentalists came out for it.

We also use Allman's (1988) shape functions for the displacement field corresponding to drilling degrees of freedom as well as the variational equation suggested by Hughes and Brezzi (1989).

The preparation was finalized with a tapering drill corresponding to the shape of the implant.

For these implants, both cortices were perforated using a 0.8 mm drill (corresponding to the inner diameter of the thread).

After a guide wire was drilled into the tibia, two tibial tunnels were created with a cannulated drill corresponding to the measured diameter of the prepared tendon graft.

Based on surgical anatomy, an angular stable implant system (RatFix, RISystem) with the corresponding surgical jigs (Drill- & Saw guide 5.00 mm, RISystem) was developed.

Then, based on the relationship between reservoir pressure and bottom hole flowing pressure corresponding to different drilling modes, the experimental procedures on reservoir damages in three drilling modes (e.g. gas drilling, liquid-based underbalanced drilling and overbalanced drilling) were designed.