Sentence examples for corresponding cracks from inspiring English sources

Table 3 Static tests summary: displacements, valgus malrotation of the tibial head and their corresponding cracks and ultimate loads, including mean values and standard deviations (SD) Specimen Crack / ultimate load [kN] Medial displ.

As shown on Fig. 11, in case repair actions are performed, the length of the corresponding cracks is equal to zero just after repair (i.e. there is no crack at this location), and another crack may initiate and propagate at the same location (imperfect repair).

The present proposed method can be further extended to deal with the corresponding crack problem associated with any number of inclusions.

More than 90% of the total fatigue life is consumed in the first stage, and the corresponding crack growth rate is lower than 10−11 m/cycle.

The strain at a given stress and the corresponding crack number and openings can then be obtained and the simulated stress-strain curve agrees well with experimental results.

The numerical model is assessed by comparing the simulated structural responses and corresponding crack patterns with the experimental counterparts.

The computed stress singularity for a penny shaped anticrack is the same as that of the corresponding crack.

With increasing in-plane constraint (crack depth a/W), the fracture mechanism of the two cracks changes from ductile fracture through mixed ductile and brittle fracture to brittle fracture, and the corresponding crack growth resistance decreases.

The results show with increasing out-of-plane constraint (specimen thickness), the fracture mechanism of the two cracks changes from ductile fracture through mixed ductile and brittle fracture to brittle fracture, and the corresponding crack growth resistance decreases.

This is determined by fitting the external stress and the corresponding crack density to experimental data for any specific laminated system.

Except for an exposed temperature of 200 °C, the ultimate shear strength of HSC reduces and the corresponding crack deformation (crack slip and crack width) increases with the increase of the temperature.