Sentence examples for corresponding compression from inspiring English sources

A series of chloride transport experiments on water/chloride diffusivity and penetration profiles of chloride were conducted on the saturated, half-saturated and fully dried concrete respectively subjected to several compressive stress levels (ranging in 0 50% of the corresponding compression loading capacity).

In addition, to estimate the pseudo-cohesive strength between fine particles forming the structure of composites studied, the corresponding compression tests were numerically modeled.

Figure 17 illustrates the neutral axis and the corresponding compression zones of the ST1 and ST2 beams, determined from the strain profiles along the depth of the beam at the critical load.

The ratios of the retained energy to the total energy for different modes are E ratio 2 = ∑ i = 1 D ′ λ i 2 / ∑ i = 1 D λ i 2 and E ratio 3 = ∑ i = 1 F ′ λ i 3 / ∑ i = 1 F λ i 3. D′ and F′ are less than the original D and F. The dimension reduction of the original HRTF tensor H ∈ ℝP × D × F brings corresponding compression ratio (CR) as CR = D × F × P D × D ′ + F × F ′ + D ′ × F ′ × P (17).

This calibration establishes a linear relationship between air pressure and the corresponding compression force applied on a 5 mm diameter cartilage disk.

Compressed expiratory flow-volume curves (at mouth) and corresponding compression-free curves (thoracic) were recorded.

In this work, force versus displacement/time data corresponding to compression and holding of a single (102 μm) calcium alginate microsphere were modelled by finite element analysis.

The Spl Qtz assemblage appears on the low-pressure side of the P T space with Spr Qtz stable at the high-pressure side, possibly representing an increase in pressure corresponding to compression.

A validation procedure is described and applied: synthetic load–strain datasets corresponding to compression and bending tests are generated and random error is introduced before the application of the proposed method.

The majority of the injuries to the pelvic tissues are results of the prolonged obstruction of labour with corresponding longstanding compression and stretching of the soft tissue of the bladder, vagina and rectum [ 4].

Then we examine the influence of loading direction by fixing the TB spacing at 3.13 nm and changing the tilt angle θ from 0° to 90°. Figure 6 gives the corresponding load-compression depth relation.