Redundancy correction: Symmetry correction: Temperature-dependent chemical equilibrium constants: Temperature-dependent concentration (number) of molecules A and B: where N A, N B are given and K A, K B, K AB are obtained from the previous step.
The correction to subsurface temperatures due to the palaeoclimate record uses standard procedures (e.g. Beck 1977; Beardsmore and Cull 2001; Westaway and Younger 2013) and heat flow is then recalculated from the corrected temperature gradients.
Correction for temperature improved bias to −10.98 % with a similar precision profile of ±5.78%.
It will be shown that, within the limitations of the measurement setup, the combined correction of temperature and shore A hardness is feasible and may support the further development of the CPX method.
Meanwhile, for trajectory calculation and firing data correction, the temperature information obtained from the device may be simultaneously transferred to the gunner task terminal computer through a Controller Area Network (CAN) bus interface.
It also is in good agreement with the value obtained from raster image correlation spectroscopy [51] [53] after correction for temperature of 37°C.
The diffusion coefficient of the eGFP-monomer is in good agreement with previously published values obtained by Scanning Fluorescence Correlation Spectroscopy [36] after correction for temperature of 37°C and by FCS in [50] after correction for the wrong diffusion coefficient of the reference standard.
Two non-survivors had initial control of surgical bleeding and a transient partial correction of temperature, but had progressive hypothermia and death related to bleeding recurrence.
Indeed, correction for temperature changes on the QT interval should also be considered in human trials, especially where stress testing is incorporated into the design, and repeated-dose large animal toxicological studies.
Corrections for temperature, solvent density, and viscosity are made transparently in UltraScan using user-supplied buffer conditions and experimentally derived temperature values.
This is mitigated by the temperature correction described in "Temperature correction" section to a large extend and any residual temperature effects are then removed using the frequency slicing described "Frequency slicing" section.
