Sentence examples for corrected air from inspiring English sources
The monthly corrected and uncorrected wind power values reveal that the corrected air density values are almost stable.
Figures 11, 12 and 13 shows a plot of corrected air permeabilities versus FZI based permeability for various depositional systems applicable to this work.
Oxygen consumption and CO2 production were calculated by multiplying the corrected air flow by the 1 min average gas concentration after correcting for room air.
Images were obtained via the eyepieces using an adapter from Micro-Tech-Lab Micro-Tech-Lab Micro-Tech-Lab Austrialor camera to an Olympus BX51 Upright miconnecte with a standard merCanonlamp, EOS5Dped with infinity colorcamerair objectoves 4× (0.16 N.an.
To compare measurements that were taken on different sampling days, we corrected air pollution concentrations for absolute differences between the mean background concentrations during all sampling days and the background concentration of each sampling day, following previous studies (Cyrys et al. 2003).
Initially it was reported that the pilots issued a Mayday, but this was later corrected: air-traffic controllers declared an emergency when no contact could be made with the plane.
This article has been amended to correct air pollution measurements of PM10 and PM2.5 particles mistakenly given in terms of square metres rather than cubic metres.
The recommended quantity for the specification of brachytherapy gamma ray sources is the reference air-kerma rate (RAKR), defined by the International Commission on Radiation Units and Measurements [ 3, 4] as the kerma rate to air, in air, at a reference distance of 1 meter, corrected for air attenuation and scattering.
In addition to routine calibration by air and water phantoms, CT numbers were corrected using air density samples from intrathoracic trachea to eliminate effects of X-ray tube aging [ 13].
The metabolic rate constant of 18F-FDG corrected for air and blood, K i (ml cm−3 min−1), was then calculated as {K}_i=frac{K_1{k}_3}{k_2+{k}_3} (4).
Also, the corrected monthly air density ρ kg/m3) is calculated as follows: rho = frac{{bar{P}}}{{R_{text{d}} bar{T}}} (10 where ( bar{P} ) is the monthly average air pressure, ( bar{T} ) is the monthly average air temperature (K) and R d is the gas constant for dry air (287 J/kg K).
