Sentence examples for core equilibrium from inspiring English sources

To study HEU-CFE replacement in a mixed core, equilibrium core 51 was selected as a reference core which average burn-up of the standard and the control fuel elements (in percent of the initial value of U) are equal to 23%and44%4%, respectively.

Biosorption of MB and MV on breadfruit peel and core reaches equilibrium in 150 180 min.

The efficacy of the repair procedure and the important parameters controlling the post-repair response are highlighted through consistent evaluation of the confining action exerted by the jacket on the encased core using equilibrium of forces and a frictional model.

The effects of the inert core radius, equilibrium constant, intraparticle diffusion and film mass transfer resistances on the time evolution of bulk concentration and particle radial profiles were investigated.

An elementary feasibility study of neutronic aspects of TRR mixed cores has been performed in our previous paper in which all neutronic parameters of equilibrium core and all mixed core configurations were analyzed (Lashkari et al., 2012).

The multicycle capability in PARCS was used to determine the equilibrium core condition for three batch cores loaded with the UO2 and then with the U3Si2 fuel designs.

Three fuel types with characteristics similar to the three batch fuels of equilibrium core were designed for the initial core.

An equilibrium core smaller than that of existing core of PARR-1 was established to provide higher neutron flux per unit power by increasing the fuel loading from existing 12.61 g 235U per plate to 32.61 g 235U per plate and also increasing the existing coolant/moderator channel width from 2.1 to 3.5 mm.

A procedure of designing transition cores to achieve the equilibrium silicide core of RSG GAS with higher fuel loading of 300 g U/fuel element (FE) (meat density of 3.55 g U/cm3) has been proposed.

Based on these calculation models, a CANDU-SCWR equilibrium core is designed with a thermal power of 2540 MW, the core equivalent diameter is 4.30 m and the active length is 5.94 m.

A new equilibrium core is designed with this flow scheme to show the feasibility of an SCLWR-H core with an average coolant core outlet temperature of 530 °C.