Transport simulations at the IO confirmed that charge-exchange sputtering of the SS surfaces would not affect burning plasma operation through core impurity contamination, but a second key issue is the potential melt damage/material loss inflicted by the intense photon radiation flashes expected at the thermal quench of disruptions mitigated by massive gas injection.
Key results are: (1) peak wall net erosion rates vary from about 0.3 nm s−1 for diffusion-only transport to 3 nm s−1 for diffusion plus convection, (2) T/Be codeposition rates vary from about 0.1 to 10.0 mg T s−1 depending on the model, and (3) core plasma contamination from wall-sputtered beryllium is low in all cases (< 0.02%).
The housing isolates the waveguide core from external contamination and provides a robust platform for efficient evanescent field interaction with the materials filling the compartment.
The data-driven and theoretically sound solution with the three highly interrelated factors Animal Reminder Disgust, Core Disgust, and Contamination Disgust led to a moderate model fit.
The ejection of the last 16 BUK reactor fuel cores caused significant contamination of Earth orbits with NaK droplets that varied in sizes from a few microns to 5 cm.
In this study, supplementary methods were developed for e.g. sampling of intact bryozoan limestone cores and for saturation and contamination of the cores with cis-DCE.
Although the sawing step was a potential source of contamination of core samples, sawing-fluid associated microorganisms may not necessarily be contaminants, but indigenous organisms released from the cores during sawing.
Beyond philosophical debates about proving a negative, contamination in core samples has been a chronic problem.
The contamination of core plasma results in fast loss of plasma energy by radiation.
GC analysis of the hydrocarbon fraction of the core extract indicated that contamination may be diesel derived.
On the other hand, if adjusting the chemical composition of the ceramic core to fit the contamination of the sheath element, the choice using AgCu3 as the inner and outer sheath may also be a good choice.
