Sentence examples for cooling test from inspiring English sources

High heat load and helium cooling test facilities have been constructed.

This paper describes the design of the SMB and results of the cooling test of the SMB.

A cooling test and a magnetizing test were carried out using a Hall sensor and thermocouples adhered on the top surface of the material.

To test the feasibility of dedicated gas cooling system for detectors, a cooling test platform was built and preliminary cooling test has been done, indicating that during 250°baking the detector temperature is promising to be cooled down to the detector temperature limit of 75°.

This paper experimentally investigates the effects of rotation, turning vane, trailing edge ejection, and channel orientation on heat transfer (HT) in a typical turbine blade three-passage internal cooling test model.

In this article, two closed loop spray cooling test rigs with the same spray nozzle are established to investigate the thermal performance of R22 spray cooling and R134-a spray cooling.

During cooling tests, mass flow rate oscillations are observed.

The beams in the two cooling tests developed high tension forces, however there was no structural failure in the assemblies.

Thermal analyses were conducted for both heating and cooling tests, and several main factors that affect energy consumption were considered.

We have conducted counter flow cooling tests of a 100-m long duplex-counter-flow tube with liquid nitrogen and obtained basic data of initial cooling and temperature distributions along the tube.

Long exercise and cooling tests did not induce weakness.