Sentence examples similar to cooling mould from inspiring English sources

5 When cooled, mould the rice into ping pong-sized balls, then roll in the flour, followed by the egg and then breadcrumbs.

The molten copper dissolving the hydrogen was pulled downward to be solidified through a cooled mould at a given transference velocity.

Analysis of virtual models showed that those with conformal cooling channels predicted a significantly reduced cycle time as well as marked improvement in the general quality of the surface finish when compared to a conventionally cooled mould.

The injection was done in a horizontal direction by means of two-part water cooled moulds made of hardened tool steel.

The flow distance can be increased with higher temperature of the mould, but then the time needed for crystallization may have to be shortened by cooling the mould.

melting and metal treatment; preparation of moulds and cores; casting of the molten metal into the moulds, cooling for solidification and removing the casting from the moulds; finishing of the raw casting.

The production process can be divided into the following major activities: melting and metal treatment; preparation of moulds and cores; casting of the molten metal into the moulds, cooling for solidification and removing the casting from the moulds; finishing of the raw casting.

The results indicate that the cooling system which leads to minimum cooling time is not achieving uniform cooling throughout the mould.

The formation of SEBS-gMA phase on the interface works as a coupling agent to improve interfacial adhesion between PA6 and PC, which leads to the disappearance of voids on the domain boundary generated due to the different volume shrinkage between PA6 and PC in fast cooling in a mould.

Thermoplastic materials properties play an important role in mould filling and cooling analysis of injection moulding.

It is also possible to cool the moulds down by coolers instead of the energy-intensive chilling machines.