Sentence examples for cooling down rate from inspiring English sources

The temperature interval is 10 K, and the cooling down rate is 2 K/min.

The Fad measurements were conducted under the cooling down process from a temperature higher than the T g of bulk materials with a cooling down rate of 2 K/min.

During transient operation of the chip, the heat up and cool down rates varied over the chip, and were dependent on the distance to the heater.

The sample fabrication consists of four stages: (a) growth of 3C-SiC thin (~100 nm) films using gas-source molecular-beam epitaxy (GSMBE), (b) ultrathin (~2-3 Ni) Ni film deposition using electron beam, (c) annealing at temperatures 973 1173 K for 30 min, and (d) cooling down to 373 K at a rate of 12.5 K/min.

When the sample cooled down (cooling rate: 10 K min−1) to room temperature, the obtained bone ash was ground into powder manually and kept in a desiccator over silica gel for further tests.

As the immigration debate heats up in the Republican campaign, some experts argue that illegal immigration rates are actually cooling down.

A low cool-down rate as well as good thermal contact are crucial for the durability of the grid.

When the soil starts to cool down, the growth rate slows.

Right after completion of the nanoislands growth, the structures began to cool down at the rate of 1 °С/s.

In this case, the polymer film was melted inside the crystallizing device at 190 °C; after 2 min of conditioning at this temperature, the samples were cooled down at the rate of 4 °C/min to the final temperature of 100 °C.

The 0.5-mm-thick foils, formed by the hot press, were melted inside the heating stage, conditioned for 2 min at T = 190 °C, and cooled down at the rate of 10 °C/min to one of two crystallization temperatures: 122 or 125 °C.