Sentence examples for cooler compressor from inspiring English sources

Elsewhere, the American-invented CoolBot thermostatic controller can be coupled with a standard home air conditioner to create low-cost cool rooms, using less energy than an equivalent commercial cooler compressor.

This strategy, called Cooler Trigger Model (CTM), involves dynamically controlling the switching frequency and the switch 'ON′ time of cooler compressor so that the heat extraction is in accordance with the heat generation.

During the EM dewar test, the requirement to reduce the transmitted vibration from the 2ST cooler compressor was recognized as mitigating the thermal instability of the SXS microcalorimeter at 50 mK.

Effect of real time constraints like approach temperature, pressure drop in gas cooler, compressors efficieny, degree of superheat, expanders efficiency and effectivenesss of intermediate heat exchanger are also incorporated.

If however, the temperature of the water in the bottom part of the tank is lower than the setting of the lower thermostat, the lower thermostat switches "on" and sends voltage to the lower heating element (a thermostat that has switched power to a heating element or cooling compressor is said to be "calling") and heats the water.

The new architecture proposed in this paper consists of a heat exchanger where air is heated up by molten salts or other fluids as helium, a post-combustion chamber, a reforming-membrane system based on three reaction/separation steps, a retentate recirculator, a hydrogen cooler and compressor, and a final PSA.

The cooling capacity, compressor power consumption, CO2 mass flow rate, and COP value were analyzed.

Thus Evans had produced the first detailed and theoretically coherent design for a vapor-compression refrigerator, identifying all the major components (expander, cooling coil, compressor and condenser) of a refrigeration cycle, leaving some to credit him as the 'grandfather of refrigeration'.

Most refrigerators have a fan motor which moves air across the condenser which cools your compressor.

This work studies the following cycle configurations: two-stage with injection (with and without intermediated cooling between compressors) and a single-stage circuit coupled with an auxiliary circuit.

This paper deals with CFD modeling of a novel water spray cooled reciprocating hydrogen compressor which provides efficient cooling of the system during compression.