Sentence examples for coolant tubes from inspiring English sources

The engineering design of the TRTM components such as container, rigs, capsules, pebble beds, neutrons reflectors, and purge gas and coolant tubes are presented.

The system was designed based on three basic parameters optimization: number of coolant tubes, diameter of the coolant tube and inlet velocity of the cold gases.

Specially designed and fabricated air-side fins and flat extruded coolant tubes have significantly improved the thermal performance of engine cooling systems.

It, therefore, is considered that the irradiation hardening of structural materials would not promote the brittle fracture at the corner of rectangular coolant tubes of the blankets caused by the load of In-Box LOCA.

We concluded that a system comprising a large drain tank and 60, large-diameter coolant tubes can withstand the thermal shock due to the hot fuel salt, and therefore we conclude that system is feasible.

It is observed that the loads acting on the coolant tube were high.

The outcomes show that, different size of coolant tube diameter has the biggest impact on the system efficiency, compared to the other two variables.

A feasibility study is performed with 2D-mathematical models for heat shield designs using carbon fibre composites and tungsten monoblocks, which are form-locked to the coolant tube instead of metallurgically bonded.

Unlike other reviews which focused solely on coolant tube and air-side design and spacing, flow velocities and pressure drops, this article will also focus on the impact of nano-coolants on improving the thermal efficiency of radiators while summarizing the efficacy of aerodynamically efficient air-side fins like delta-winglets in reducing air-side pressure drop.

Cable connectors on the bracket on the coolant tube may be in the way - need the brake down to get give some room.

Preferably a 12mm box wrench - expect trouble if the end of the stud is too close to the coolant tube that obstructs access.