Sentence examples for converter I from inspiring English sources
The reactive power is determined by comparing the reactive power current capability of the converter, i q1, with i q2, which corresponds to the appropriate amount of reactive power in order to keep the voltage at the terminals of the converter at 400 V: i_{q} = hbox{min} { i_{q1},i_{q2} } (8) i_{q1} = sqrt {I_{N}^{2} - i_{p}^{2} } (9 where I N is the nominal current of the converter.
The acceptable level may vary up to 20%to30%0% above the rated value which depends on the rating of DFIG and the power electronic converter (i.e., matrix converter).
We also assume an ideal A/D converter (i.e., no additional noise because of the A/D process, including dither) and a sampling rate of once per symbol at the output of the matched filter.
In order to retain this increment to the nominal value, the terminal regulating unit such as PV should change its operation from MPPT to BVR mode and battery converter shifts to current control mode and charge/discharge of the battery is determined by the reference current provided to the battery converter (i.e. rated charging current provided by the manufacturer).
ECG recordings were performed using the Mark-8 recording system (Biosemi V.O.F., Amsterdam, Netherlands) at a sampling rate of 2048 Hz (0.3 Hz to 400 Hz band pass filter) and an AC resolution of 500 nV/bit (16 bit AD converter, i.e. 32 mV AC input range).
Download a PSP video converter (i.e. PSP Video 9) to change your favorite music videos into MP4s.
Although most LCC-HVDC schemes in service today are point to point schemes, there are two multi-terminal schemes in service at present, and in these only three converters i.e. terminals are connected together but not forming a mesh.
As described in Section 3.1, if there is no additional grid code requirement on power dispatching, the dispatch power limits of the dual-BESS are set by the rating of the DC/AC converters i.e. the converter is allowed to operate within the range [0, P conv ], where P conv is the power rating of the converter.
The result of the analysis conducted is that such a voltammetric electrode functions like a converter type I.
The worst case is when the dispatched power has already reached the converter rating, i.e. P D = P conv.
Different converter materials, i.e. 12C and 13C graphites, glass carbon and boron carbide, have been selected and thermal tests performed with a high power electron beam.
