Sentence examples for conversion temperatures from inspiring English sources

Finally, the conversion temperatures for the isopropanol dehydration were lowered by as much as 100 °C by transitioning from the least acidic to the most acidic catalysts surface.

The typical 50% and 100% conversion temperatures of the co-impregnated Pd Fe Ox/NaZSM-5 catalyst for low temPd Fe Ox/NaZSM-5ation (T50 and T100) were 29.1 and 47 °catalystctively.

Secondly, the external positioning allows high temperature gradients between the heat removal zone and the active area resulting in a good adjustability of appropriate reformate conversion temperatures (e.g. 160 °C) and a more compact cell design.

The results showed that the NO conversion temperatures of 6% CuO/TiO2 were 280 °C at T50% and 450 °C at T99%, compared to 325 °C at T99% for 6%CuO 10%ZrO2/TiO2O2.

The solubility curves of TPI in the solvents and the conversion temperatures between isothermal and non-isothermal crystallization were supplied to propose the available concentrations and temperatures for TPI isothermal crystallization.

Figure 3 Catalytic activities and conversion temperatures.

This agrees well with results of chemical equilibrium calculation of the gas-to-particle conversion temperature.

When Mn loading reaches 50 mol%, the total conversion temperature is lowered to 260 °C.

This phenomenon was quantitatively analysed with respect to the conversion temperature and the crystallization conditions.

Two particle morphologies are tested and experiments are conducted over a wide range of conversion, temperature and heating rate.

The average particle size increased from 1.2 to 2.9 nm when the conversion temperature was increased from 400 to 800 °C.