Sentence examples for conventional value of from inspiring English sources

Under such conditions the conventional value of 0.8 would result in non-conservative (too long) predicted life for structures subjected to CW loading in the creep regime.

For lower values of e, a significant decrease of the Nusselt number is observed whereas the Poiseuille number keeps the conventional value of laminar developed flow.

It is based on a syringe type die-counter electrode set-up used for conventional continuous electrospinning, the key feature being a reduction of the distance between the spinning die and the substrate from the conventional value of 10 50 cm down to the millimeter and below mm range in order to suppress the onset of bending instabilities and the corresponding spread of the deposition area.

The pH value of rainfall is from 5.5 to 6 on average,1 which is the conventional value of unpolluted rainwater, i.e., 5.6 [36].

In pop music, the conventional "value" of a producer's work is judged by the breadth of its appeal.

This was performed in ArcGIS9.3 with the power set to the conventional value of 2.0 and 24 data points were used to estimate the value.

The Mk I played a key part in setting the conventional values of the electrical units in 1990.

The results show that significant improvements can be obtained with respect to devices based on conventional values of the design parameters.

For Claire Black in the Scotsman, the book is "politically repugnant, morally questionable and intellectually bereft … it all comes down to this: make yourself more attractive (ie, adhere to mainstream, conventional values of what is considered to be attractive) and you will reap rewards".

Conventional values of activity coefficients of ionic species, in this case sodium and chloride ions in aqueous NaCl, have been published, as if these were the experimental values of individual ion activity coefficients, although no experimental method is really able to provide these separate quantities but only the mean activity coefficients.

The ISO 8608, in order to facilitate the comparison of the different road roughness profiles, proposes a classification which is based, as already stated, on their PSD, calculated in correspondence of conventional values of spatial frequency n0 = 0.1 cycles/m and angular spatial frequency Ω0 = 1 rad/m.