Sentence examples for control piston from inspiring English sources
High-speed computers and the ability to electronically control piston movement in a free-piston generator (via the coils and magnets) could help engineers solve this problem.
Key characteristics of linear compressor are also described, including motor type, compressor loss, piston sensing and control, piston drift and resonance.
A small control piston diameter together with a small fuel oil inlet passage diameter contribute to a short opening delay, however, they lead to a significant increase in the closing delay.
Results show that the control piston diameter, fuel oil inlet passage diameter, fuel oil outlet passage diameter and their interactions are influential factors to the opening delay, while the fuel oil inlet passage diameter has the dominant effect on the closing delay.
Pressure control, piston speed control, and residence time control are important features in this press.
The key to powering the device, says Quoin CEO Mike Jacobson, is a carefully controlled piston that generates gas at four times the pressure of a conventional turbine compressor.
Sometimes curiosity-seekers open drawers of miscellany labeled "Pumps???" or "Not BNY???" or just "???" Treasure lurks there for anyone interested in a "proposed gasoline storage shed" or "pilot controlled piston actuated lever valve".
The valve chamber was connected to a computer controlled piston pump and to an afterload reservoir.
Excised rat lungs were cannulated with a 16 gage blunted needle and attached to a computer controlled piston ventilator (Flexivent, SCIREQ Inc. Montreal, QE, Canada).
A computer controlled piston pump (CompuFlow 1000, Shelley Medical Imaging, Toronto, Ontario, Canada) supplied sinusoidal, zero-net volume flow rate waveforms, Q pump t) = Q0 sin ωt), into and out of the phantom at its base, where and the volume flow rate amplitude was controlled using the pump.
The fuzzy controller is used to control the piston when the piston locates far away from the target position whereas the PID controller is applied when the piston is near the desired position.
