The phrase "continuously heated" is grammatically correct and can be used in written English.
It means that something is heated constantly without interruption. Example: The metal was continuously heated for five hours in order to achieve the desired temperature for forging.
The mixtures were continuously heated for a certain period till a ruby-red color appeared.
The resulting solution was continuously heated at 150 °C under hydrothermal condition as before for 90 min.
Results are reasonable and promising for a good design that may considerably reduce the energy expenses for a continuously heated geothermal spa.
Inside the bed, a number of polar tracer particles continuously heated by microwave energy were real-time tracked using a top-grade infrared camera.
The aim of this paper was to derive and verify a new approach to WC calculation from measured temperature differences around a continuously heated needle.
Dilatometric experiments employing heating rates between 0.5 and 200 K min−1, atom-probe tomography measurements on continuously heated specimens and thermo-kinetic simulations were performed.
The continuous wave CO2 laser beam was used to continuously heat a sensitized (with ethylene) precursor gas mixture, in which iron pentacarbonyl (vapor) and acetylene were the iron and carbon donors, respectively.
3. The Eemax Instantaneous Water Heater operates only when you need hot water, saving energy by not storing and continuously heating water in a tank.
The transformation and mechanical properties of the laser continuously heat treated welds of 2205 duplex stainless steel were investigated.
Aqueous chloroauric acid solution from 0.25 to 2.5 mM was heated to boiling and the four times molar amount of sodium citrate was added, followed by continuously heating for a certain period to get the ruby-red colloids.
While continuously heating the HNO3 solution on hot plate to keep the solution at the azeotropic point, nanostructured substrate (100 nm pitch nanogratings) was immersed into the HNO3 solution for a sufficient time over 5 min until the oxide thickness is saturated.
