Sentence examples for contents of the matrix from inspiring English sources

The SiO2 contents of the matrix glass of the Vulcanian blocks vary, so we used the average (72 wt% SiO2) in our calculations (Table 1).

The Sr/CI and La/CI ratios of a type 1 matrix are positively correlated with the Ca contents of the matrix (Table 1 and Fig. 3).

The Sr/CI ratios of the type 2 matrix are positively correlated with the Ca contents of the matrix, but the La/CI ratios are not (Table 1 and Fig. 3).

The contents of the matrix (widetilde{{{varvec{W}}}}_{{CVC}}) are given below: begin{aligned} begin{array}{c} widetilde{{{varvec{W}}}}_{{CVC}}= left[ begin{array}{ccc} 1&quad 1&quad -1 end{array} right] in {{varvec{R}}}^{1 times 3}, end{array} end{aligned} (56) (widetilde{{{varvec{W}}}}_{{CVC}}) contains some of the elements of matrix (widetilde{{{varvec{W}}}}_{{G}}).

Regarding the lack of a strong positive correlation between the La/CI ratio and Ca contents of the matrix, there could be two possible explanations: (1) La in the aqueous fluids was incorporated into Ca-poor secondary minerals, and the amounts of such minerals controlled the LREE abundances of matrix or (2) La was not dissolved in the aqueous fluids.

Physicians and patients cannot fully retain the contents of the matrix consisting of genes, alleles, diseases and probabilities.

The residual Cr content of the matrix was estimated, to determine its influence on the thermal properties of the matrix.

The deterioration of glass-fibre reinforced cement (GRC) arises to a substantial extent from the alkalinity and calcium hydroxide content of the matrix.

The variation in the Al content of the matrix phase was also estimated to affect the NiP deposition behavior due to the small scale galvanic interactions.

Nanoscaled features, like grain size, solute content of the matrix, precipitate size, density or distribution were quantitatively estimated by analytical transmission electron microscopy and atom probe tomography.

The increase in nitride content of the matrix with temperature is consistent with hardness values that vary between ~3 and 10 GPa.