Soil sample TKB had the highest total C and N contents, and sample MIY, the lowest.
The tests were conducted at optimum moisture content and samples were tested in unsoaked conditions.
However, wear resistance was more dependent on inherent Si content, and samples with higher Si content showed better wear resistance.
Fabbri et al. [7] have also studied the similar materials and found that the chemical stability of samples in CO2 increases with zirconia content and samples with x ≥ 0.5 are more stable, as seen in the case of present material.
The variation in film thickness and growth rate may result from the interfacial reaction between Al2O3 and ZnO layers which will be introduced in the following content, and samples with lower bilayer thickness will be more affected.
The presence of octene comonomer units also affects the mechanical behavior of iPB and produces increase of flexibility and ductility with increasing comonomer content, and samples with octene concentration higher than 6 7 mol% show unexpected remarkable elastomeric properties.
After designing questionnaire content and sampling, this study obtained 538 samples.
It was also observed that the moisture content and sample diameter had a notable influence on heat transfer coefficient.
The thermal conductivity was determined as a function of admixture content, temperature, water content, and sample density within 35° to 140 °C at a uniaxial pressure of 2 MPa.
