First, fiber contents (or raw material contents) not only affect the cost of the total production but also environmental impacts during the production.
The protein and moisture content of raw material and barrel temperature had no significant influence on cysteine and methionine content.
Best values for ethanol yield of 81.6, 59.4 and 68.4% of theoretical yield based on glucose content in raw material were achieved for SHF, SSF and PSSF, respectively.
The non-linear mapping relationship between the component, the composition content of raw material, the flexural strength, and the fracture toughness of the composite ceramic tool is investigated.
The aim of the work was to investigate how the moisture content of raw material and the densification parameters, pressure and temperature, affect compression strength, dry density and moisture uptake of the formed pellets.
A composite with good properties was prepared from high content of raw material obtained from renewable sources (40 wt% of tannin substituted the phenol in the preparation of the matrix and 50 wt% of matrix was replaced by sisal fibers).
The results showed that with a high operating pressure (in terms of short path evaporation), with a pressure of 1000 Pa, and one step of separation, lactic acid purity around 89.7% was obtained which was about 18 times lactic acid concentration higher than the initial content in raw material.
In the range of study, lactic acid purity obtained at 1 kPa, using evaporator temperature of 86.7 °C and condenser temperature of 16 °C presented the highest lactic acid purity which was about 11 times lactic acid concentration higher than the initial content in raw material.
Moisture content (% raw material): samples were put in ventilated oven at 105 °C until a constant weight was achieved.
The validated method was applied to quantify the drug content in raw material, tablets and eye drops which was found to be 99.36% to 101.02%, 98.99% to 100.56% and 99.09% to 100.91%, respectively.
Content: The raw material you are trying to communicate.
