Sentence examples for content in gas from inspiring English sources
When the moisture content changed from 12.5% to 18.7%, the concentrations of H2, CO and CO2 changed from 4.66% to 6.92%, 11.23% to 10.15%, and 16.55% to 17.82% respectively, and the tar content in gas decreased from 15.1 g/m3 to 14.4 g/m3 when the moisture content increased from 12.5% to 15.4%.
In the cases that the lower amount of sulfur content in gas condensate will be required, some essential modification can be carried out as follows: A larger reactor.
This observation could partly explain the reduction of hydrogen content in gas phase (only 18%) by a higher production of carbon dioxide.
The decrease of hydrogen content in gas phase and an increase of carbon dioxide production were also observed in group D. Both observations, hydrogen consumption and low butyric/acetic acid ratio, suggested a significant homoacetogenesis.
An acidic solution of CuCl was formerly used for analysis of carbon monoxide content in gases, for example in Hempel's gas apparatus.
The highest ethanol content in the gas phase by gas stripping was about 17% at 0.15 cm particle thickness.
The ethanol content in the gas phase by gas stripping increased by 16% with the decrease of particle thickness from 0.4 cm to 0.15 cm, but it then obviously decreased by 40% with the decrease of particle thickness from 0.15 cm to 0.05 cm.
Through the conversion, the methane content in the gas is increased, which makes green gas compatible with natural gas.
As the cells grow and the overall oxygen consumption rate increases, the gas controller gradually increases the oxygen content in the gas feed line to maintain the dissolved oxygen set point.
Performance parameters such as air factor, feeding point position and bed height are determined looking for a maximum gasifier efficiency and gas heating value and a minimum tar content in the gas.
Methane content in the gas and VFA concentrations (acetate, propionate, butyrate, isobutyrate, valerate, isovalerate, capronate and isocapronate) were measured using gas chromatography (GC) and high performance liquid chromatography (HPLC), respectively [ 61].
