The platform used in the study has hundreds of small holes; a small plastic rod protrudes slightly through each of them so that it contacts the bottom of the test subject's foot.
CuO nanoflowers are placed on CuO nanograss matrix instead of directly contacting the bottom surface of Cu foil, thus forming a hierarchical structure as seen in Fig. 1c, d.
The two-terminal setup uses the conductive AFM probe as the first electrode (which contacts the top end of the MWCNTs) and a metallic wire as the second electrode (which contacts the bottom metal line via a large area of MWCNTs covered with silver paste).
The plate was sealed with adhesive seal and centrifuged at 240 g for 20 sec at room temperature to ensure the contents would contact the bottom of the well.
If the acetabular bone is very sclerotic and hard, or if the hemispherical dome created by reaming is smaller than necessary, it is difficult for the acetabular cup to contact the bottom of the bone bed since its pole cannot reach the predetermined depth.
Consider a graphite rod to help you feel the lure's action better as you retrieve, as well as the sinker's contacting the bottom when using the 3-way sinker rig described in a following step.
One contact is defined for each of the doped regions: for the n-type part a rounded-shape contact is used (Top), while the p-type part is contacted at the bottom face (Body).
Electrical grounding of the samples was performed by contacting the SrRuO3 bottom electrode, that is exposed from the side of the sample, with one of the terminals of the carrier using conductive silver paste.
The hot plate was simultaneously set on the sample to make sure the top of the sample to tightly contact with the bottom of the hot plate.
The top sheet contacts the bottom one, and friction takes place between the contact surfaces because of surface roughness in microscale.
