Sentence examples for contact force provided from inspiring English sources
Maximal contact force provided by magnetic catheters was inferior to that obtained with conventional catheters in experimental studies (26.8 vs. 45.4 g).
This paper extends the sensor such that the system can monitor the electrostatic interaction force provided to the contact pads.
The system response due to a concentrated force provided by ground contacting is solved for as an example to illustrate the solution procedure.
The heavier particles come in contact with the deck surface and acted upon by frictional force and vibrational force provided to the deck of table.
The contact forces mainly provided the guidance of the motion at the tibiofemoral articulating surfaces.The normalized root mean square error between outcomes of the virtual simulations and tests for the angle of internal-external rotation of the tibial insert was less than 8% for one cycle of lunging and squatting.
They gave the leadership of Doctors Without Borders -- also known as Médecins Sans Frontières or MSF -- better contact information to reach U.S. forces, provided 9,000 personnel with additional training on the rules of engagement, and moved to pre-load aircraft computers with the no-strike list, which included the Kunduz hospital.
"Distributing individual modules over the various links of a robot provides contact force sensing over a large area of the robot and allows for the implementation of spatially aware, engaging physical human-robot interactions," they write.
Two main vibration sources in three-screw pumps, the fluid exciting force and the screw contact force, are studied to provide the basis for vibration control in this paper.
Experimental results can provide guidance for the reasonable selecting of the pigging velocity, and the pre-tightening force to provide enough contact force.
The experimental device, stiff enough to be non-intrusive on the system response up to several kHz, provides the contact force, vibration velocity and contact image with a high sampling rate.
The approach provides a contact force that pushes the slightly protruding conducting metal (Au or Cu) in contact with the LEDs.
