Sentence examples for contact closure from inspiring English sources

The duration of contact closure necessary to cause synechial closure appears to vary greatly from patient to patient.

Polarity switch from positive to negative mode was set at 135 s after contact closure.

The delivery time was set to 4 min and 55 s with contact closure delay of 20 s to avoid initial spray instability.

The mass spectrometer was started by a contact closure signal from the LC at 20 min. The nonlinear gradients were developed in an analogous way as described above for the 4 h gradients except for the different linear gradient time.

(vi) Between each two runs, the noncoated tip of the fused silica column was subjected to a programmed washing for 10 min (350 μL/min), using 50% methanol and 0.1% formic acid, with a syringe pump triggered by a contact closure signal sent from the Spark autosampler, prior to the start of the nano-LC gradient.

Mr. Geyer attributes part of the firm's growth to marketing efforts built around a strategy of "awareness, contact and closure".

Two distinct modes of shear failure can be specified depending on the dominance of crack opening or crack closure contact zones.

In the numerical modeling of the in situ operation, the whole process of the data and the main fracturing including fracture propagation, closure, contact and proppant transport were simulated.

Adamu 2002 defined success as no eyelash-eyeball contact, complete lid closure and no over- or under-correction.

Computational mechanics codes include contact or over-closure models to account for contact stiffness, which can be related to surface roughness and nominal pressure from Greenwood and Williamson.

The increase in elastic parameters is attributable to the reactions at the intergranular contacts and the closure of the microcracks as the skeleton pressure increases.