The phrase "construction specification" is correct and can be used in written English.
It can be used when referring to a document that outlines the requirements of a building or construction project. For example: The construction specification must be approved by the architect before construction begins.
The values of m i are obtained from the Highway and Railway Construction Specification and Standards of Guangdong Province, China.
Variability can be accounted for in the construction specification for deterministic design and directly in reliability based design.
This paper discusses the development of a model design and construction specification for thin [less than 38 mm (1.5 in).] non-participating permanent formwork panels (also known as, stay-in-place forms and lost forms) made of FRP or FRC materials with or without non-metallic reinforcements for use in the construction of concrete slabs, in particular, highway bridge decks.
Mr. Rosen was the author of The Principles of Specification Writing (1967), which was renamed Construction Specification Writing: Principles & Procedures and is currently in its sixth revised edition.
It also provides an overview construction specifications.
Construction specifications are usually required because drawings alone can rarely define the qualitative issues of a scheme.
The relative moving displacements of each ASLS module are obtained which were then compared to the allowable value designated by the construction specifications.
The performance of TWT and UTW sections built with various designs in Texas has been evaluated, with the goal of further improving design standards and construction specifications.
It is expected that this study could help develop or improve design standards and/or material or construction specifications to prevent distress from horizontal cracking in CRCP.
At 3% Portland cement content and more, the cement treated-stabilized shale dust satisfied Nigerian highway construction specifications for road materials, especially as fills and embankment; for both light and heavy trafficked roads with the reduction in the swellability indicators.
The result is an optimized shading structure for the particular low energy building according to predefined requirements, taking into account local conditions, building orientation, the purpose of building, investment and construction specifications.
