Sentence examples for constraints of the average from inspiring English sources

The power levels at SU are obtained by maximizing the average achievable rate under the constraints of the average transmit power at SU and the average interference temperature to PU.

Under the constraints of the average transmit power at SU and the average interference temperature to PU, the sensing duration, energy threshold, and power levels are optimized to maximize the average achievable rate at SU. Consider a CR network with a pair of primary and secondary transceivers as depicted in Figure 1.

The optimization criteria consists of minimizing the input fluid power (due to the peristaltic wave) subject to constraints on the average flux of fluid and area of the channel.

Secondly, we propose a limited feedback link to improve performance of cell-edge users while holding constraint on the average number of feedback bits in the cell.

This is done to remove the potential of a misleading constraint on the average coefficients reported in Table 6.

The sample within the range must satisfy the constraints of the weighted average.

In particular, we solve a joint constrained optimization problem to find the user pairing which maximizes the network capacity and minimizes the transmission power, such that certain network performance constraints in terms of the average capacity per user or the average outage probability per user are satisfied.

We herein present the results for joint optimization of power and capacity, given a certain network performance constraint in terms of the average outage probability per user and average capacity per user, respectively.

In particular, we consider joint optimization of power and capacity; the user pairing is performed to maximize the total network capacity and minimize the transmission power per user, such that a certain network performance constraint in terms of the average outage probability per user or the average capacity per user is satisfied.

The way of the power level selection at SU side is optimized to maximize the achievable rate of SU under the constraints of average transmit power at SU and average interference temperature to PU. Simulation results demonstrate that the proposed strategy can significantly improve the throughput of SU compared to the conventional strategies.

This reveals that reliability and delay may become two competing constraints in a QoS routing model where both constraints are at stake increasing the probability of meeting the reliability constraints worsens the average delay.