Sentence examples for constant admittance from inspiring English sources
An example of optimal load shedding for a power system with aggregate induction motor and constant admittance loads is given.
The unified model is given in three conventional dq coordinates and described by Norton model which is the parallel connection of injection current source and constant admittance matrix.
The model with the "stepping admittance flanks" is an approximate to the corner with the constant admittance if the number of ring-shaped zones is high enough, so that the variation ofGi(r) in the zones remains restricted.
In this model, (R_{m}) represents the membrane resistance while the interface impedance is modeled by a parallel combination of a resistor ((R_{i})) and a CPE defined by an admittance constant ((Q_{i}=1/C_{i})) and order ((alpha _{i})).
The catalyst layer is modeled by a parallel combination of a resistor ((R_{c})), a CPE defined by an admittance constant ((Q_mathrm{dl}=1/C_mathrm{dl})) and order ((alpha _mathrm{dl})), and a series branch with resistance ((R_mathrm{ct})) along with an inductance ((L_mathrm{C0})).
In admittance representation, a constant phase element is defined as Y = Y o (jω) n, where Y o and n are adjustable parameters (n = 0,1 corresponds to an ideal resistor and a capacitor, respectively), and ω is the angular frequency.
Additionally, (T^{prime }_{doi} ), (G_{ij} ) and (B_{ij} ) are the transient time constant of axis d, the transmission admittance between ith and jth machines and the transmission conductance between ith and jth machines, respectively.
The parameters like dielectric constant, dielectric loss, ac conductivity, ac resistivity, impedance and admittance of the struvite crystals were calculated.
An assessment is made of the errors associated to assuming constant or frequency-dependent ground parameters in the calculation of the ground-return impedance and the ground admittance correction in the case of a poorly conducting ground.
\omega_c\omega_c\omega The building block of constant k filters is the half-section "L" network, composed of a series impedance Z, and a shunt admittance Y.
