They consequently influence displacement efficiency, and, to a lesser extent, sweep efficiency.
It is classified in the category of one-dimensional continuous systems and consequently the displacement in situ depends on the time and a single spatial coordinate.
Previous studies that assessed changes in mandibular position after SARME have limitations since the cephalometric analysis used does not allow the three-dimensional evaluation of the mandibular positioning, consequently lateral displacement of the mandible due to expansion cannot be assessed.
The biomechanical properties of the deep fascia were studied with hysteresis and fatigue tests and consequently load-displacement curves were generated and analyzed.
The low-permeability layer has the lowest number of fingers and longest wavelength, and consequently the highest displacement efficiency.
This variation can be justified by the fact that as the frequency decreases, ions can easily reach the deeper zones of the activated carbon pores, and consequently, their longer displacement within the electrolyte results in higher electrolyte resistance [31].
When low viscosity direct (O/W) emulsion is formed, it can quickly flood out through pore throats, consequently enhancing the displacement efficiency, as observed in the works of Jennings et al. (1974).
However, due to the continuous oil phase of reverse microemulsions, they exhibit favorable interactions between the oil phase and the oil contained in carbonate rocks with better wettability results, reducing the IFT and consequently enhancing oil displacement from the rock pores.
Experimental results, which are consistent with the model predictions, demonstrate that the compliant multistep devices exhibit improved lateral stability and consequently larger stable displacements compared to the conventional comb drive actuators.
The results show that the plastic response of the specimens is highly sensitive to the amount of restraint provided at the supports, particularly for the specimens with ends of the stiffeners free since they experience larger lateral deflections and, consequently, larger axial displacements at the supports.
