Sentence examples for connection loss from inspiring English sources

We also had to add some detection for connection loss or sensor malfunction.

Reconstruction method and connection loss, resolution factor, adherence conditions and the effects of Boolean noise in the calculation of permeability are fully discussed.

Issues such as unpredictable delays and possibilities for connection loss that are introduced by application of web technologies are identified and a solution for them is proposed.

Considering the mode field mismatching between the DCCPCF and the tapered fiber, the calculated connection loss around 1.55 μm is below 3 dB.

We study and analyze the optimal performances of this heterogeneous system based on the bit rate, the blocking probability and user connection loss.

Further, a major issue concerning Web-based educational systems is that a server crash or Internet connection loss can completely shut down access to a course, an occurrence that can sometimes result in permanent loss of data.

The system studied performances such as the bit rate and the blocking probability and connection losses are estimated in "Evaluations of optimal performances" section.

It is a copper indium gallium selenide (CIGS) module with an assumed lifetime of 20 years and a derating factor of 80%, including, e.g., aging, wiring, connection losses, dust, and shading[27].

Fig. 3 Distribution, computation, consensus and diagnosis stages The message from a cell might be not received due to incorrect timing, connection losses, or failure in the cell, which cannot be considered a univocal consequence of a sleeping cell failure (as described in Section 5).

Open image in new window Fig. 7 HO latency (2) HO failure probability   Once HO is triggered, any subsequent degradation of T-DeNB signal strength below a threshold level will result in connection losses and an HO failure will occur if this interruption exceeds the predefined delay limit.

A common modeling approach entails the description of a PV module through an equivalent circuit with lumped components, the most commonly adopted being a circuit containing a current generator (accounting for the light generated current), a diode (used to shape the knee of a typical I-V characteristic), a series, and a shunt resistor (to account for connection losses).