Sentence examples for connected to the terminal from inspiring English sources

The proposed $35.7 million development includes a 41,000-square-foot terminal four times the size of the existing one and a three-level garage for 1,200 cars connected to the terminal by covered bridges and walkways.

The terminal line is connected to the terminal load directly, and breakers and CTs are only installed at the beginning of the terminal line.

The presence of a Meckel's diverticulum is strongly suggested by CT scan demonstrating an abnormal outpouching, blind-ending digestive structure connected to the terminal ileum by a neck of varying caliber.

The presence of a Meckel's diverticulum was usually suggested at CT scan by an abnormal outpouching, blind-ending digestive structure connected to the terminal ileum by a neck of variable caliber.

Bulky alkenes such as (E -stilbene, or compounds with E -stilbenethdrawing grorp direcompoundsected to the terminal alkene, such as (E)-4-phenylbut-3-en-2-one, (E)-1-(3-chloroprop-1-enyl) benzene, and (E)-1-(2-nitrovinyl)benzene with not accepted as substrates of the SMO (Lin et al. 2010, 2011b).

Collieries in the Paulton basin were connected to the terminal basin of the northern branch of the Somerset Coal Canal which was the focus for tramroads that connected at least 15 collieries around Paulton, Timsbury and High Littleton.

For example, under the influence of the electric field produced in a copper wire when its ends are connected to the terminals of a battery, electrons move through the wire from the end connected to the battery's negative pole toward the end connected to its positive pole.

Then the earth electrode, inner probe and outer probe were connected to the terminals of earth-electrode (HC1), inner probe (SP2) and outer probe (HC2), respectively.

Figure 11 shows the schematic of the power system module, PIN 1 and PIN 2 of J1 connector are connected to ground and to 16.5V, respectively, PIN 1 and PIN 2 of J2 are connected to the terminals of the circular saw's DC motor.

The first and last resistors are the ones connected to the terminals of the battery or the voltage source.

Twist the filaments so that they will become stiff, and can easily be connected to the terminals.