Sentence examples for connected to a test from inspiring English sources

The GSHP system connected to a test room with 16.24 m2 floor area in Fırat University, Elazığ (38.41° N, 39.14° E), Turkey, was designed and constructed.

The horizontal GSHP system connected to a test room, Elazığ (38.41°N, 39.14°E), Turkey, was designed and constructed for space heating.

The GCHP system connected to a test room with 16.24 m2 floor area in Fırat University, Elazığ (38.41°N, 39.14°E), Turkey, was designed and constructed.

The systems connected to a test room in Firat University, Elazig (38.41°N, 39.14°E), Turkey, were designed and constructed for space cooling.

Second, the plastic trachea used in vitro was connected to a test lung with a low compliance; the pressure change applied down the endotracheal tube during suctioning was then immediately transmitted around the cuff.

The tube for sampling the mask particle count was connected to a test probe designed for this purpose (TSI Incorporated, St . Paul MN), which was inserted through the fabric of the protective device.

Housing facilities consisted of indoor (25 m²) and outdoor areas (141 m²), and subjects were tested individually in a small cage (42 × 58 × 57 cm (b ×  l ×  h) connected to a testing compartment (approx. 1 m², 2.3 m high) inside their familiar indoor area.

Then, a HGHEs was designed and connected to a 15 m2 test room with a heating load of 1  kW at Nottingham Trent University.

The sample volume resistivities were measured at different applied voltages employing a Keithley 6517A electrometer connected to a Keithley test fixture (Keithley Instruments, Cleveland, Ohio, USA).Data in Figure 8 depicting the resistivity behavior of the epoxy nanocomposite samples was normalized with respect to the resistivity measured at an applied voltage of 10 V.

To verify the scale laws for the RPS, a demonstration unit connected to an atmospheric test rig with water and air as working fluids was realised (Willems et al. 2010b).

The upright is connected to a relatively stiff testing frame at two points using bolts with a clear distance of 500 mm.