Sentence examples for configurations resulting in a from inspiring English sources
A diversity of designs exist, including floating, mid-water column and seabed mounted devices, with a variety of moving-part configurations resulting in a unique complex of potential environmental effects for each device type, which are discussed to the extent possible.
This procedure was repeated 10 times with independent starting configurations, resulting in a global average; the typical statistical error was <2%.
Each regioisomer can be formed as either an R,S or S,R enantiomer as the epoxide group can attach at each of the double bonds in two separate configurations, resulting in a total of eight EETs (reviewed by Zeldin [ 1]).
The flow sheeting results reveal high performance for both process configurations, resulting in an aviation fuel yield 0.172 kg/kgfeedstock and a thermal efficiency of 40.5% in the case of employing a modified Methanol catalyst for the mixed alcohols synthesis (MAS).
In terms of the differences in Ki values, we speculate that larger substrates may be more capable than smaller ones of effecting the transition between the closed and open configurations, resulting in an increased off rate for the inhibitor.
It was also found that the hybrid steel/Kevlar plate configurations resulted in a 26% weight reduction compared to the monolithic steel plates while providing better ballistic protection.
Unfortunately, most control configurations result in a non-minimum phase control path; even a collocated control actuator and error sensor will not necessarily produce a minimum phase control path in the discrete domain.
Long transient times in response to decreasing habitat area and increasing isolation may cause the present plant species distribution to reflect the historical rather than the present landscape configuration, resulting in a so-called extinction debt.
Results showed that using a biomass:glycerol ratio of 1 0.75 for bagasse and 1 0.53 for straw the pretreatment efficiency, measured by the biomass hydrolysis yields, was increased after multiple extrusion passes and, more importantly, the insertion of a reverse element in the screw configuration, resulting in a straw hydrolysis yield of 68.2%.
The new optical system uses a double Amici prism to achieve an in-line, direct view configuration, resulting in a substantial improvement in image quality.
