Sentence examples for configurations of minimum from inspiring English sources

The aforesaid strategy may also be used to determine structural configurations of minimum rotation distortion.

This methodology can easily be incorporated in the strategy of constructing structural configurations of minimum rotational response, which is the main requirement in the design of structures expected to sustain strong ground motions.

A minimum spanning tree algorithm is utilized to determine the configuration of minimum power losses along with a GA for optimal capacitor placement.

A minimum spanning tree (MST) algorithm is utilized to determine the configuration of minimum power losses along with a GA for optimal capacitor placement.

5, the procedure of constructing a structural configuration of minimum torsional response is demonstrated by means of the formulation of the approximate continuous approach, using the strength dependent flexural rigidities of Sect. 2.

Regarding the configuration of minimum torsion, it is evident that the predicted one by the condition of having the points m-CR and CM at the same location [xm-CR = 0 in Eq. (21)], is very close to that obtained by 3D dynamic analyses.

This procedure of constructing a structural configuration of minimum rotational response is now investigated in asymmetric systems with elements having strength dependent stiffnesses and this is demonstrated in a ten story eccentric dual building under the ground motion of Kobe 1995, component KJM000.

The method is then used in a range of optimisation problems covering the design of a coastal defence, increasing fluid damping within an oscillating box by the addition of baffles, and design of a multi-body configuration for minimum drag in supersonic flow.

The problem of optimum array configuration for minimum variance distortionless response (MVDR) beamformers has been recently investigated under the assumption of accurate estimate or prior exact knowledge of the source direction of arrival (DOA).

Investigations of minimum network configurations were carried out by analysing three important elements: (1) the minimum number of scan stations; (2) the minimum number of real-world planes on which targets are distributed; and (3) the minimum number of point targets per plane.

The fatigue limit was dependent on fiber orientation, notch configuration and stress ratio (ratio of minimum cyclic stress to maximum cyclic stress).