Table 5 Heat sink study configurations Case Configuration ORC-heat sink Heat sink position 1 Simple cycle (SC IC1 a 2 Parallel cycle (PC IC1 a 3 Simple cycle (SC IC2 b 4 Parallel cycle (PC IC2 b.
In this study, we have used CFD to simulate the velocity field and the turbulent kinetic energy inside a computational tank to find best hydrodynamic performance for two nozzles configurations: case 1) one single 3 mm air nozzle; case 2) a set of nine 1 mm air nozzles.
Nevertheless, the networks evaluated after disconnecting these three discrepant edges ranked just below the criterion established to cast the edge as predictive/non-predictive. For the 100 rounds of states configurations case, the difference was of 6 edges.
These zones are considered as combined SFN-2x1 Alamouti MISO networks allowing diversity transmissions in an SFN network and according with the following configuration cases: i).
It can be verified that BER curve of GOFDM MMSE is slightly lower/higher than that of GFDM MMSE for SNR smaller/larger than 9.7 and 7.5 dB for the configuration cases 1 and 2, respectively.
Hence, M is chosen as 9 and 129 for GFDM scheme and the nearest power 2 numbers, i.e., 8 and 128 are chosen for GOFDM scheme in the configuration cases 1 and 2, respectively.
In some configuration cases for concrete pavements, such as at the intersection of two road pavements or the connection of a road pavement to a bridge abutment, the pavement can be considered to be semi-infinite with one end adjoining a rigid structure.
Main results are illustrated via a configuration case study and discussed in conclusions.
For example, in configuration case 1, GOFDM to GFDM complexity ratio for J = 4 and J = 8 are 0.4474 and 0.2724, respectively, and in configuration case 2, this parameter equals 0.2106 and 0.1203 for J = 4 and J = 8, respectively.
The efficiency of the optimum vessel configuration (Case 3) was improved due to installation of a vane-type inlet diverter, perforated plates and a high-performance mist extractor. .
The efficiency of the optimum vessel configuration (Case 3) was improved due to installation of a vane-type inlet diverter, perforated plates and a high-performance mist extractor.
