Sentence examples for conductor circuit from inspiring English sources
Also on ICs SEI can be done with nominal supply voltage as long as the Seebeck junction is located in a gate conductor circuit.
A high-voltage conductor short circuit occurs if the silicone and ETFE insulation break down and there is contact between the conductive metal surfaces of the high-voltage cables, a high-voltage and low-voltage conductor, or a high-voltage cable and a shocking coil or pulse generator can; these may be manifested by melted conductors or an arc mark that is visible on the pulse generator can.
We report the designing and simulation results of the HTS band-pass filters for Ku band with different bandwidths of 0.08 and 0.5 GHz, in comparison with the same shape filters using normal conductors as the circuit conductors of the filter resonator.
An effective 1D electric-thermal link finite element is presented in the paper, which is suitable for weak-coupled Joule heating analysis of the electric conductors and circuits made of a functionally graded material (FGM) with spatial continuous variation of material properties.
A model of a vertical conductor for a circuit analysis is proposed based on calculation results by the Finite-Difference Time-Domain (FDTD) method.
The breaker should be of an ampacity that does not exceed the circuit conductor's rating.
Then I went to Hamburg to work with Simone Young, one of the most gifted opera conductors on the circuit.
In a process similar to that employed with open-wire pairs (described above), the forward and return conductors of each circuit in a multipair cable are braided together, equalizing the relative positions of all the circuits in the cable and thus equalizing currents induced by cross talk.
This study used the Nernst Planck equation and impedance measurements to model the kinetics of electrochemical migration under condensed water drops between copper conductors on printed circuit boards.
When the electrical signal transmitted in a unit length of the conductors or printed circuit traces, it is proved that there will be a certain time delay between terminal and signal source (called propagation delay unit, tp), which is proportional to the square root of the dielectric permittivity of the signal channel insulate material.
