Sentence examples for conductive contact from inspiring English sources
The in situ presence of CNT during acid-etching process shows remarkable two advantages: providing deposition sites for Si atoms to restrain agglomeration of Si nanoparticles after Al removal from Al-Si alloy powder, increasing the cross-layer conductivity of the paper anode to provide excellent conductive contact sites for each Si nanoparticles.
In order to prepare Sn nanowires, a platinum (Pt) film was deposited by vacuum evaporation onto one surface of the AAO template to provide a conductive contact.
(4) an eEEG system: Plugging in the transmitter/battery module activates electrode impedance testing to determine the appropriate conductive contact to the scalp and give correcting feedback.
(b) The eEEG system: Plugging in the transmitter/battery module activates electrode impedance testing to determine appropriate conductive contact to the scalp and give correcting feedback.
These considerations suggest that a stalled-slab assumption should also be considered, a condition that maintains the slab in conductive contact with the forearc above it.
Above a critical value (maximum packing fraction), the microfibril network was connected by electrically conductive contact points and thus was able to sustain electron transmission in the whole system.
Moreover, the conductive contacts between phases necessary to develop the three phase boundary in the PEM electrode should be highly improved.
The characteristic stretched-to-compressed exponential crossover is detected for degradation-relaxation kinetics in thick-film systems with conductive contacts made of Ag-Pd and Ag alloys.
In this work we discuss the use of multilayer stacked structures (p(SiC H /i(SiC H /n(SiC H /p(SiC H /i(Si H /n(Si H)) sandwiched between two transparent conductive contacts as colour sensing devices.
Laser induced surface graphitization was used to realize 36 conductive contacts with 1 mm×1 mm area each, pitch 1.2 mm, on one detector side whereas a 8 mm×8 mm large area graphite contact was realized on the other face for grounding or biasing.
A conductive link via an external circuit (e.g., a lamp or other device) must be provided to carry electrons from the anode to the negative battery contact.
