Sentence examples for conduction coefficient from inspiring English sources
In Eq. 1Q is the quantity of heat, K is heat conduction coefficient (refers to the conducting heat ability of material), A is the area of heat conduction, and ΔT is the difference in temperature of the material.
Numerical calculations based on the improved LII model were conducted to predict the soot particle temperature with known gas temperature, the heat conduction coefficient, the primary particle diameter, and the mean aggregate size, as well as values of assumed soot absorption function E(m) and the thermal accommodation coefficient of soot α.
Relations depending on temperature and pressure were carried out for the determination of thermophysical properties as the specific heat capacity, viscosity, heat conduction coefficient, density of the refrigerants.
It takes into account that the approximate solution may be discontinuous at grid cell interfaces and allows the approximation of discontinuities in the heat conduction coefficient.
On the basis of the model, the effects of the sphere radius, the bath temperature, the PCM thermal conduction coefficient and the spherical shell material on the melt fraction of PCM inside a sphere are discussed.
The traditional thermal model of presses neglects the effect of roughness between two contact surfaces on the contact conduction coefficient, which causes the analysis to have a low accuracy.
The artificial viscosity and artificial thermal conduction coefficients are proportional to the viscous and thermal entropy generating terms, respectively, in the viscous entropy conservation law.
These models give heat conduction coefficients that will prevent moisture concentration and ensure heat balance under continental climate conditions and suggest different sets of materials that can be used on walls and roofs.
According to the features of area and housing, for providing heat balance, total heat conduction coefficients requirements are calculated to be between 0.62 and 2.08 °Cal/m2 °C h for walls, 0.33 and 1.62 °Cal/m2 °C h for roofs.
At the end of the study, under the condition of no moisture on surface of structural components and in areas where the indoor and outdoor temperatures are 25.3 °C and 20.2 °C, respectively, maximum total heat conduction coefficients are calculated to be between 1.38 and 1.73 °Cal/m2 °C h.
This model ensures adequate accuracy because in practice the thermal conduction coefficients between the reservoir and the cap/base rock are not precisely known.
