Sentence examples for conditions of substrate from inspiring English sources

An alternate procedure based on chronopotentiometric measurements achieved in particular conditions of substrate and time duration was proposed form which the kinetic rate constants, Km and Vm, could be directly deduced after numerical calculation.

The objective of the present paper is to study the conditions of substrate preparation as well as the conditions of deposition on the microstructure and hardness of the produced films.

The results revealed that the production of photobiological hydrogen was higher than the batch fermentation with maximum photobiological hydrogen production of about 0.0039 g h−1 L−1, which were achieved at optimum conditions of substrate concentration (3.25 g L−1); temperature (32 °C), pH (7.66) and carbon dioxide concentration (3.96%).

However the voltammetric characterization of new AUT films, prepared on such electrochemically treated surfaces by re-incubation in the AUT solution, showed that the conditions of substrate cleanliness and smoothness necessaries to reproduce a close-packed and compact AUT monolayer were not reached.

Amin et al. [21] in 2007 studied the growth of nanowires under different conditions of substrate, catalytic material, and chemical composition of TixOy precursor.

Primary rat osteoblasts (MC3T3-E1) cells have been cultured on nanostructured TiO2 films fabricated at different conditions of substrate bias and working pressures.

The transient simulation results show that steep gradients in the cell number are possible under the condition of substrate limitation.

Higher endoglucanase production (56.1 U/g) was achieved for a selected condition of substrate initial moisture of 72%, air inlet humidity of 70%, and flow rate of 20mL/minn.

Synthesizing carbon materials largely depend on the deposition technique, process parameters, condition of substrate surface and ratio of the gaseous chemistry.

Under optimum conditions (13%% of substrate concentration and 90 min of isothermal treatment at 121 °C0.5) °C), the SAHT resulted in 75.36 (±0.16) % of solids recovery.

We assumed that this difference of affinity could be due to the different enzyme constructions used as well as differences in the DNA binding assay conditions (concentration of substrate and enzyme).