Sentence examples for conditions of friction from inspiring English sources

Optimal conditions of friction were found analytically for the tuned case.

In such simulations, proper consideration of friction condition is important in obtaining reliable results and the shear friction factor is widely used for bulk deformation for this purpose.

Underestimation of the friction coefficient is guaranteed by a proper choice of adaptation gains and initial conditions of the friction parameters.

A multistage testing technique which mimics operation conditions of real friction units was developed.

On the contact area, it is also assumed that the conditions of Coulomb friction prevail.

The scoping experiments on Physarum computing in conditions of minimal friction, on the water surface were performed.

In other words, the influence of the MPT on μ is stronger in the conditions of oil friction than in air.

The influences of the pass bottom radius, the sidewall radius, the sidewall angle, the roller shoulder fillet radius, as well as the roller gap on the rolling process under the conditions of different friction were discussed.

The other lot of samples were tested on an inertial test stand according to a methodology simulating the real conditions of dry friction, at a contact pressure of 2.5 3 MPa, at 300 1200 rpm.

The diagnosis and condition monitoring of friction units are of primary importance when providing the non-failure operation of machines and mechanisms.

Despite the fact that both static and kinetic friction coefficients can be measured with little difficulty under laboratory conditions, the time- and condition-dependent characteristics of friction coefficients associated with both clean and lubricated surfaces have proven exceedingly difficult to predict a priori from first principles.