Sentence examples for conditions element from inspiring English sources

FEM analysis is discussed in detail, including modeling, load application, application of boundary conditions, element selection, and postprocessing.

Explicit finite element (FE) models were created and validated, including boundary conditions, element types and element sizes.

The new set is then fed back to Comsol Multiphysics to have the new performance index calculated through updated boundary conditions, element and mesh generations, and numerical analysis.

Under anoxic conditions, element mobilization depends mainly on hydroxide dissolution.

Fig. 5 EDX spectra of ZnO prepared with the complexation ratio of 4 1 and calcination temperature of 400 °C Table 3 Weight% and atomic% results of ZnO under the optimal conditions Element Wt% At% O K 18.03 47.33 Zn L 81.97 52.67.

After the test series, the used setup was rebuilt inside the FE System and the determined parameters were verified by an analysis using equal conditions (element types, sizes, etc).

To quantify the stress state for these conditions, elements of the Observational Design Method have to be used.

Further, general active boundary condition elements are defined.

True boundary condition elements are also defined based on their net sound power radiation.

Boundary condition elements do not work on the local control principle: in a general case secondary sources on each subarea need information of the primary field at each subarea.

Thus we get the following condition: elements [ z ¯ 1 u 1 + z ¯ 2 u 2, ε ¯ ] ∈ H 2 ( 0, 0 ) (that is, elements ( z ¯ 1, z ¯ 2, ε ¯ ) are the solutions of system (9)) if and only if either ( z ¯ 1, z ¯ 2 ) is an eigenvector of 10 g ″ ( 0 ) M ( z ) corresponding to the eigenvalue 2 ε ¯ or ( z ¯ 1, z ¯ 2 ) = ( 0, 0,).