Sentence examples for concrete height from inspiring English sources

Results showed that the reduction rate of peak discharge increased with the increase of concrete height, and the reduction rate kept constant as 36.98% when the concrete height was 5 cm or more.

Considering the characteristics of frequent occurrence and serious losses, a technology for the standpipe in flat roof of green building community was designed to alleviate the urban waterlogging, and a test was carried out to find out the influence of the concrete height, underlying surface and return period on reduction rate of peak discharge and rainwater pipe diameter.

Analysing the torque measurement at different concrete heights is expected to characterize the duplicate measurement, which certainly needs multiple tests and simulations.

Test variables included bonded length, width ratio between the FRP strip and concrete prism, height of concrete free edge, and offset in load position (load angle).

The synthesized plaster composites help to clean environment and can be used for low-economical cheap lightweight units suitable for load bearing non-concrete low-height walls of buildings.

Another factor that determines the balance between steel and concrete is the height of the wall.

This concept enables to select other parameters as unknowns (bending element concrete class, section height, etc).

Simple open concrete cubicles, shoulder height, each bearing a brass plaque with the name of a previous winner, they are the final stop on the road that leads from Compiegne to Roubaix.

The use of cement with low hydration heat, the concrete in lower height layers and the use of ice were the main properties evaluated, and they all caused a reduction in temperature.

If you're swotting up on your tennis rules ahead of Wimbledon next week, you'll know that tennis balls used on the famous courts must bounce between 53 and 58 inches after being dropped onto concrete from a height of 100 inches.

The parameters considered to affect the failure modes and the shear capacity included the beam width, the concrete strength, the height and thickness of the FRP sheet, the elastic modulus of the FRP and the strengthening configuration (complete wrapping, U-jacketing, and side bonding).