Sentence examples for concrete depth from inspiring English sources
"That was a good indication that we are moving in the right direction and it also showed that we now have concrete depth to the squad.
The chloride ion content along concrete depth direction, compressive strength and elastic modulus of concrete was measured with attack time.
Steel fiber concrete had the highest bond reduction with concrete depth despite the highest bond strength, which was attributed to the segregation of steel fibers.
The primary variables for the pull-out test included the strand diameter (d b ), initial prestressing force (f po ), cover concrete depth (c) or cover depth to strand diameter ratio (c/d b ), and embedment length (l e ) in UHPFRC.
In JSCE (2007), Eq. (7) is used to estimate the ultimate shear strength of concrete v cd considering the compressive strength of concrete, depth of member, longitudinal reinforcement ratio and axial force.
In the beam cross-section web width was designed as 120 mm, beam height was designed as 360 mm, topping concrete width was designed as 320 mm and topping concrete depth was designed as 75 mm.
(2) Generally, the joint opening decreases with the increasing of bolt pretightening force, and increases with the increasing of concrete delamination depth and bolt corrosion depth.
Lastly, using the proposed model, the influences of the axial stress level, bolt pretightening force, concrete delamination depth and bolt corrosion depth on the mechanical behavior of the joint are investigated.
The second one (150 mm) is used to discretize the material from the concrete cover depth until a maximum depth of 20 cm. Figure 1 summarizes the proposed algorithm used to estimate the evolution in time and depth of T, W and Cf inside concrete.
This has been reflected in Scott and Alexander's (2007) study, where corrosion current decreased with increase in concrete cover depth or in other words cracks depth.
The sensitivity of the carbonation rate and concrete cover depth to the time to carbonation at the depth of the steel was mathematically determined.
