The phrase 'concrete coating' is correct and can be used in written English.
It refers to a protective layer or covering that is applied to concrete surfaces for various purposes, such as sealing, waterproofing, or improving aesthetics. Example: The construction company applied a thick layer of concrete coating to the basement floor to prevent water from seeping in.
Open image in new window Fig. 2 Information about concrete coating systems provided by coatings manufacturers and agencies.
It is not known why the pipeline, a 12-inch line with a concrete coating buried 6 to 13 feet below the river back in 1991, ruptured, although many speculate it is related to the surging river.
The onset of microcracking first appears in the exterior-reinforced concrete coating at the pipe springline in these three tests.
Thin shotcrete layer as the concrete coating is one of the most important components of tunnel structural support which cover the tunnel surface thoroughly.
This chapter addresses stability analysis of marine pipelines on the seabed under hydrodynamic loads (wave and current) and provides guidelines for pipeline stabilization using concrete coating.
On-bottom stability analysis of offshore pipelines on soft clay by DNV-RP-F109 (DNV, 2010) results in very unreasonable pipe embedment and concrete coating thickness.
An experimental investigation was conducted to evaluate the compressive strength, modulus of elasticity and carbonation resistance after heating of air-cooled concrete coated with surface coating of concrete (SCC).
Firstly, cylindrical concretes coated by epoxy (Ep), polyurethane (PU), and combination of epoxy and sodium silicate (Ep SS) were tested to investigate coatings ability to protect concrete samples against corrosion.
Diffusion reaction neutralization model was developed to predict the neutralization depth of concrete with coating finishing material.
Hence it was concluded that most of the original concrete and coating could be preserved without further protection.
Concrete weight coating is not normally required because of high submerged weight and low ocean-current speeds in deepwater areas.
