Sentence examples for concentrations in bed from inspiring English sources

An in-depth study was designed to determine the influence of road sediments and storm sewers on bioavailable (0.5 M HCl) trace metal concentrations in bed sediments of Nuuanu stream, Oahu.

However, pesticide concentrations in bed sediment and suspended sediment samples exceeded safety thresholds in 50% of the samples and the average contribution of legacy pesticides to the SumTUC.riparius was >90%.

The use of the N/ash ratio to estimate N volatilization from manure shows promise but markers that are in appreciable concentrations in bedding material will not be accurate.

A dynamic mathematical model has been developed which predicts the transient temperature response of circulating fluidized bed (CFB) combustors as well as the corresponding transient carbon and oxygen concentrations in the bed.

H2 concentrations in the bed were uneven and increased downstream and high concentrations of H2 production were also found on walls.

A downstream survey of sediment-bound lead (Pb) found that concentrations in the bed sediments, which were likely to be mobilised during a first flush, were significantly higher than in solution.

Contaminant concentrations in the bed sediments of a 30-year old basin have been determined and those constituents identified that were most likely to be eluted during present infiltration of stormwater.

Arsenopyrite associated to Au produced elevated As concentrations in the bed sediments downstream the mineralized areas [ 17, 29, 30, 36].

Calculated particle velocities and concentrations in spouted beds were in agreement with experimental data obtained by He et al. (Can. J. Chem. Eng. 72 (1994a) 229; (1994b) 561) and San Jose et al. (Chem. Eng. Sci. 53 (1998 35611998 3561

According to the kinetic model, the reduction of NO by CO catalyzed by bed material is very important, especially at low temperatures where the CO concentration in the bed is high.

For relatively high flow rates, per-pass oxidation conversions between 9 and 35% are reached depending on the reactor system considered, and on the titanium oxide concentration in the bed, ranging between 0.1 and 0.5 kg m−3.