Sentence examples for compressor pressure from inspiring English sources

Ambient air temperature and compressor pressure ratio are analyzed.

Furthermore, by increasing compressor pressure ratio, the exergy efficiency increases and the cost rate decreases.

Results show that RPRMC,1 is more predominant to cycle efficiency than compressor pressure ratio.

It is avoided using a valve that reduces the compressor pressure.

The coupling relations among compressor efficiency, expander efficiency, compressor pressure ratio and expander expansion ratio are quite complex.

In the turbo jet engine, the main operating variables are: compressor pressure ratio rp and turbine inlet temperature (TIT).

Although the variation of compressors' pressure ratio was small within each mode, the pressure ratio of the high stage's compressor changes a lot which was about 3.8 for the single stage and 5.5 for the cascade cycle.

We consider several internal and external irreversibility sources that include losses in the non-isentropic turbines and compressors, pressure drops in the heat input and heat release, irreversibilities in the regenerative heat exchanger, heat-leak through the plant to the ambient and non-ideal couplings with the external constant-temperature heat reservoirs.

For compressor output pressure 1.5 MPa, pressure gradient fell between 1.81 snf 2.25 MPa/m and gas flow rate was same with two former experiments, sand production failed to occur, which indicates sand is stable.

This identification is necessary for the overall gas turbine system decomposition into several subsystems, including the axial compressor, high pressure shaft (HP), low pressure shaft (LP) and the exhaust system, shown in Fig. 5.

For compressor output pressure 2.5 MPa, the pressure gradient between inside and outside sand-filling cylinder was 2.26 MPa/m and gas flow rate was 40 m3/min, and sand instability occurred.