Sentence examples for composition of deposits from inspiring English sources

It has been found that reliable indications on composition of deposits may be also obtained by measuring the current efficiency of the deposition process, which largely exceeds unity in the case of composites.

Pulse frequency and duty cycle had little effect on the chemical composition of deposits.

The surface composition of deposits was ascertained by chemical analysis (WDXRF).

The morphologies, phases, microstructure and composition of deposits were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman micro-spectroscopy, transmission electron microscopy (TEM), energy dispersive spectra (EDS), and Auger electron spectra (AES), the results showed that different boron carbides were produced by three kinds of deposition mechanisms.

It was found that the composition of deposited layers is influenced mainly by the current density and hollow particle size.

Changing the amount of PN2 also affected the composition of deposited films.

As it can be seen, the thermal evaporation of the bulk chalcogenide glass of As40S60 composition causes the As42.9S57.1 composition of deposited thin film.

Usually lifetime of tin containing baths is limited because the composition of deposited films has poor stability.

The catalytic activity and the efficiency are maximum for one composition of deposit which corresponds to 70% IrO2 and 30%Ta2O55.

EDS with standardless calibration was used to determine the composition of deposited CIGS film by using an accelerating voltage of 15 kV and a dead time of approximately 20%.

For investigating the effect of substrate on phase composition of deposited layer, the XRD pattern of sample with BK7 substrate and Ar + 5% O2 as WG is demonstrated in Fig. 4.