Sentence examples for composition clay from inspiring English sources
Writer remarks on various composition clay & other types of courts & describes how Cleveland Hts. was chosen for the Challenge match.
Teniko Royal, a brand of fast-drying composition clay tennis court surface put out by the F.C. Feise Co., of Narbeth, Pa., was used on the specially built Cleveland Hts.
Relevant geochemical tests (mineral composition, clay content, total organic carbon, thermal maturity and vitrinite reflectance) and micro structural characteristics of micro pores were also conducted.
The variability of the grain size composition (clay content) of the sediment and its 137Cs activity and organic matter (SOM) content down the profile was used to identify individual flood event couplets and the record of event rainfall (particularly extreme storm events) was used to establish a chronology for the individual flood event couplets.
Our results show that although mineralogical composition, clay content, grain size, and fabric type are basically comparable, porosity and quartz cementation are not.
The lithologic definition of shale is a rock consisting of extremely fine-grained particles to variable amounts of silt-size particles with a wide range in mineral composition (clay, quartz, feldspar, heavy minerals, etc).
The studied range of tile body compositions: clay (40 wt%), feldspar (20 50 wt%), feldspathic sand (5 20 wt%), and RSA (0 25 wt%) was shown to be appropriate for porcelain stoneware tile manufacture.
Chalcocite growth and corrosion pit depths were measured for four different experimental runs yielding corrosion rates between 8.8 and 116 μm/yr depending on duration of experiment, brine composition, and clay type (bentonite vs. Opalinus Clay).
In particular, during firing specific new minerals grow, depending on temperature and composition of clay (i.e., Ca-rich or Ca-poor clays).
The composition of clay minerals is a major factor contributing to swelling capability as some clay minerals are non-swelling.
The prediction of the aggregate expansion – and hence the batch design – is usually carried out utilizing the Riley's and/or Cougny's schemes, which are based on the bulk chemical composition of clay bodies.
