Sentence examples for composites selected for from inspiring English sources

To this end, thermal analysis were carried out on three carbon reinforced composites selected for their potential applicability in the aeronautical field for high temperature conditions and fire protection.

The multiple composite laminates selected for redesigning the lay-ups within an initial symmetrical quasi-isotropic ply configuration of [0/45/−45/90]s, had to demonstrate full orthotropic characteristics.

The composite material selected for this study is one designated by the Federal Aviation Administration's Advanced General Aviation Transportation Experiments program for use in aerospace structural applications.

Thus, 50 cycles of electropolymerization for fabrication the MWCNTs/PoAP composite was selected for this study and it exhibited favorable analytical performance.

And the PEDOT/Au/GO composite was selected for evaluating its potential application as electrochemical sensor for detection of nitrite and iodate on the basis of systematic studies on the amperometric determination of nitrite and iodate.

Hence the optimal printing sets of parameters for both anode composites inks were selected for opening times providing sable jetting and velocities above 1.5 m/s as well as complete absence of any "coffee ring effect".

Composite pipes were selected for four different diameters as 50 mm, 75 mm, 100 mm, and 150 mm.

Rotatable central composite design (CCD) was selected for nanosuspension optimization.

Two ceramics, with pore sizes of 20 and 70 μm, and two elastomers, with hard/soft segments molar ratios of H/S = 0.25 and 1.5, were selected for composite fabrication.

When an efficient joint design is selected for composite truss structures, it can then be further optimized so that it is able to carry the load efficiently between the truss members, while adding as little weight as possible to the structure.

Composite models were also selected for gorillas (distance to NNNP, stratum and X-coordinate; Figure S2).