Sentence examples for composites increases the from inspiring English sources

Moreover, the addition of 10 wt% boron carbide (B4C) particles to composites increases the critical buckling load value of composite up to 42%.

According to all these results, it can be concluded that simultaneous usage of glass fiber and carbon nanotube in the composites increases the reinforcing ability of nanotubes in polymer composites.

The oxidation of the composites increases the damping by weakening the interfacial bonding due to the oxidation of PyC during the initial stage of oxidation, and decreases the damping by the oxidation loss of carbon fibers and excessive damage of the PyC interphase during the latter stages of oxidation.

Incorporation of 1 wt.% f-MWCNTs in 5 wt.% MNT/PVDF composites increases the conductivity from 10-5S/m 10-5S/moximatoly 10-1S/m which capproximatelyted to the high aspect ratio, homogeneous dispersion, and high electrical conducting nature of the f-MWCNTs.

However, when the number of vermiculite particles in the composites increases, the available amount of the TiO2 catalyst decreases and the photocatalytic property is reduced.

Fluoride From the results, it is observed that as the concentration of nanocompounds in the composites increases, the removal of fluoride by these composites also increases, but after attaining the maximum value removal tendency decreases in 8%% nanocomposite.

From the TGA results, incorporation of APP into PP/RH and PP/KF composites increased the char residue and thermal stability of the composites.

In addition, even though all the nano-PCM composites increase the heat transfer potential of system, the composites containing Ag nanoparticles have shown better thermal performance than other composites.

At the 'on' state of the AMF, the retention times for hydrophobic steroids dramatically increased according to the trend: hydrocortisone < dexamethasone < testosterone, because self-heating of the grafted composites increased the hydrophobic interactions between the steroids and the polymer layer.

It was found that the incorporation of LATC30 into the composite increases the rate of hydrolytic degradation.

Addition of jute fibres to oil palm composite increases the storage modulus while damping factor shifts towards higher temperature region.