Sentence examples for composites could not from inspiring English sources
However, MWCNTs or graphenes reinforced copper matrix composites could not catch up with ideal value due to reinforcement dispersion in metal matrix, wettability to metal matrix, and composite material interface.
Despite significant efforts over last few decades, the toughness of HA-based composites could not be enhanced beyond 1.5 2 MPa m1/2, even when measured using indentation techniques.
The 3Y-TZP AlPO4 laminated composite could not be made because of delamination due to thermal expansion mismatch.
The treated fiber exhibited better adhesion with bismaleimide resin, but the maximum interlaminar shear strength of the PBO/bismaleimide composite could not be reproduced by increasing the treatment time at lower power level conditions.
Scanning electron microscopy (SEM), microprobe analysis showed that the formation of a CaCO3 on the composite surface could not protect the composites from saltwater intrusion because the ruptures developed throughout the composites were too great.
Thus, present types of composite materials could not be reused many times with poor recycling ability.
Lai and Ho (2016) mentioned that the composite action could not be fully developed because of various dilatation attributes of concrete and steel tube in the elastic stage.
The calculation results show that, the original design composite structure could not meet the requirements of standard HB7084-94 theaircraft aircraft vertical tail anti-bird impact performance.
Considering a minimum required concrete strength of 20.7 MPa for lifting, from Eq. 1, the lifting and placement of the composite cap could not take place before 4 days after slab casting.
CPTs of the chitosan-graft-poly(OEGMA-ran-MEO2MA-ran-AN) reflected those of the homogeneous case, but there was extensive hysteresis as the composite particles could not readily disentangle upon cooling below the CPT.
Due to their ductility, the composite samples could not be fractured in this way and had to be cut.
